Joined in 2023 
82 
63 About this deal
For hole punching – I use the typical revolving punch. The kind with a removable plate below makes it a bit nicer as that’s what will wear out first. I tend to replace these after several years of service. Go ahead and punch the hole at a size jsut big enough for the rivet to poke through.
Axes require maintenance to keep them sharp and some kind of holster or sheath to protect the edge. Keeping your axe edge covered with a sheath when not in use does three things: it keeps you safe from a sharp edge, prevents your gear from being damaged, and protects the edge of your axe from being dulled unintentionally.In just about every case where you see a cheap sheath, you will also see that rivets have been extensively or exclusively used. They are used to not only reduce production time and costs, thus avoiding the need for the sheath to be stitched, but also to avoid adding a Welt. Rivets used as makeshift Welts enable the sheath to remain relatively safe for the handler because they act as a solid barrier preventing the handler from being cut should the tool ever cut through the sheath at the joint. Another point of consideration is that rivets will, over time, tend to damage the cutting edge as the leather loosens exposing the cutting edge to the rivets whilst being bounced around in normal use.
Take the shape you just cut, folded in half, and trace it onto another part of the manila folder. Make sure the fold on your shape and the folder are aligned at the top edge as seen above. Now I have drawn the top edge of the sheath to connect with the lower end in a nice curve. The shape you decide to draw is up to you at this point, but the above is the fairly typical axe sheath look. The Hide and Drink Axe Sheaths are made by skilled local artisans in Pastores, a town in Guatemala, and are made with local soft and full-grain leather, rivets, and a snap button flap. Local methods are used for tanning and protecting the leather, increasing the durability of the leather before being shipped to the US. The artisans in the town of Pastores are so convinced that their work is some of the best in the world – that they include a 101-year warranty on each and every sheath. The Review Outdoor Gear Axe Sheath has been specifically made for a particular style and make of axe – the Gransfors Bruks American Felling Axe, which is a larger axe used for cutting down trees and saplings. The reason we include this sheath in our guide is that so many people use this axe and also because it works on similar-sized axes too.
The CRKT Berserker comes in only one size and is designed for their own Berserker axe. Thankfully it also fits other hatchets and axes too but is not suitable for large log-splitting axes. As such, it is a simple construction with stitches holding everything together and a snap button that holds down the flap. This might not be as secure as other axe sheaths, but falling off doesn’t seem to be an issue. A sharp axe will only stay sharp if the edge is protected, we offer a great leather sheath for the job.
After we compare these tools' performance in the field, we also rank their value. Models with high scores and low price tags will always be a great buy. The most well-rounded option in the test, the Fiskars Chopping Axe excels at felling trees, can cut firewood, and is nimble enough to accomplish detailed tasks. Costing little more than much smaller, and thus less powerful, hatchets, this option offers an impressive value.
About company
I find scissors to be fairly nimble for cutting leather, and it makes it easy to cut curves. Above is the welt and I am showing that the outer curve is purposefully not cut on the line. This is done so that when fitting it in the sheath, it will extend outward from the other edges, making it easy to sand down into place for a perfect edge.
Axes and hatchets are one of the most important items in a bushcrafters tool kit. You can use an axe for various things, from chopping and splitting firewood to carving, bushcraft, and even hunting. Without them, living in the woods, building shelters, and maintaining a fire would be incredibly difficult. I adjust the edge guide to about twice the distance of the stitch grove, or about 3/8 inch. Then carefully impress the tool into the leather. It takes a bit to get used to this tool, curves can be especially challenging, so go slowly and thinkthrough your moves! Helko Werk is a traditional German company that has been leading axe makers since 1844 and is the only brand to have two products on our list. They now have businesses worldwide, including in the USA, and their axe sheaths here have been handmade here too. The Double Bit leather axe sheath is specifically designed for a double-bit axe head, which allows you to have two sharp blades instead of one. A double-bit head axe is a rarer style that has two edges on either side of the head. Double-bit axes are for people who use their axe a lot so that when one edge goes dull, you can simply flip it around. This way, you can sharpen on an evening or morning and not waste any time in the girl’s (or forest). Axe sheaths for double bits are not as common and tend to be larger with two welts for the correct protection. Hatchet Sheath
VERDICT: The Helko Werk Double Bit is a heavy-duty axe sheath that will protect your double-bit axe for years. It is larger than many other sheaths as it protects both edges and the whole head. The welt is snug and secure and will ensure your edge remains sharp and undamaged while being carried around. Overall, given the craftsmanship, this sheath is a great buy and one of the best axe sheaths on the market – provided you have a double-bit axe. I start by placing the axe as pictured above, 1/4 inch away from the center fold of the folder. The reason being, this sheath will be folded over the top of the axe and 1/4 inch gives enough room for the leather to bend and compress for stitching. This also will give you some play at the opening for getting the blade into the sheath without slicing the leather. In this article, I am going to explain how to make an axe sheath with duct tape. It’s a pretty straightforward method and shouldn’t take too long to finish. So, let’s start making a sheath for that beautiful axe of yours. How to Make an Axe Sheath with Duct Tape: Step-By-Step This hatchet cover has a strong welt to ensure your edge stays clean and sharp, along with eight adjustment holes for different-sized axe or hatchet heads. Like the RingSun full sheath, the Weaver Arborist is on the budget side and made more for axes that are being used all the time rather than one that gets taken outdoors occasionally or hangs above your fireplace. The Helko Werk Leather Axe Sheath (Double Bit) is made from high-quality cowhide leather with a vegetable tan to ensure its durability and water/moisture protection. It has a heavy-duty welt (which is the part that protects the sharpened edge) with plated rivets to aid the stitching and prevent the sharp edge from damaging the leather.
Great Deal 
New Comment